MYSQL数据库mysql Non-Transactional Database Only(只支持MyISAM)

《MYSQL数据库mysql Non-Transactional Database Only(只支持MyISAM)》要点：
本文介绍了MYSQL数据库mysql Non-Transactional Database Only(只支持MyISAM)，希望对您有用。如果有疑问，可以联系我们。

MYSQL入门后来在做WordPress,一开始还不知道原来WordPress用的是InnoDB数据引擎,于是在原来的数据库里面就建了一个数据库,一开始也没发觉问题,安装,导入sql,都没问题,当时也没多想.直到这几天因为又要装多一个WordPress,用phpmyadmin访问数据库多一点,问题来了.老是一访问WordPress的数据库,就弹出错误提示“Mysqld-nt.exe应用程序错误：“0x005346c4”指令引用的“0x00786000”内存,该内存不能为读...”,然后就MySQL服务也停了,登陆不了,整个数据库都访问不了.

MYSQL入门

MYSQL入门图1 设置数据库类型

MYSQL入门纠结了挺久,也忘了是看到什么文章触发了灵感,反正后来才知道原来是数据引擎不同惹的祸.于是就想到重新运行次设置向导,把数据库类型改成支持InnoDB引擎的.马上行动,在向导里设置数据库类型(也就是图1的database usage)那里,设置成第二项,还在后面的InnoDB Tablespace Settings里把InnoDB数据文件设置放在D:\MySQL InnoDB Datafiles目录里.但是在最后execute执行的时候,却老是在Start Service那里出问题,如下图2.

MYSQL入门

MYSQL入门图2 Start service出错

MYSQL入门想直接到services.msc里面启动服务,也不行.错误提示内容为：“在 本地计算机 无法启动mysql服务 错误1067：进程意外中止.”

MYSQL入门按照网上的某些做法,卸载了MySQL服务,也没重启就重新设置,问题如故；把服务卸载了,重启后再重新设置,则是启动服务成功,但是在后面的Applying Security Settings的时候有新的问题,如下图3.图2那里的错误提示则变成“ERROR 2003: Can't connect to MySQL server on 'localhost' (10061)", 说明MySQL还是没有启动,或者启动过,出错又关了.

MYSQL入门

MYSQL入门图3

MYSQL入门顺便提一下,在MySQL5里(其他版本的我不知道)每运行一次设置向导,只要按了execute执行,都会在MySQL5的安装目录下自动生成一个原来的MySQL的设置文件my.ini的备份bak文件.并且将以修改的时间命名.因此如果设置出了问题,可以从备份文件恢复.

MYSQL入门后来还是在错误日志里找到思路.错误日志就是放在 MySQL5安装目录\Data 目录里的那个以你的计算机名命名的.err文件.

MYSQL入门首先我找到以下一段：

MYSQL入门InnoDB: Error: log file .\ib_logfile0 is of different size 0 52428800 bytes

MYSQL入门InnoDB: than specified in the .cnf file 0 10485760 bytes!

MYSQL入门101001 9:47:42 [ERROR] Default storage engine (InnoDB) is not available

MYSQL入门101001 9:47:42 [ERROR] Aborting

MYSQL入门101001 9:47:42 [Note] D:\MySQL5\bin\mysqld-nt: Shutdown complete

MYSQL入门于是就到“MySQL5安装目录\Data ”目录里把ib_logfile0日志文件删掉,重启MySQL服务,还是提示10067错误.再去查看err文件.

MYSQL入门101001 18:39:29 InnoDB: Log file .\ib_logfile0 did not exist: new to be created

MYSQL入门InnoDB: Setting log file .\ib_logfile0 size to 109 MB

MYSQL入门InnoDB: Database physically writes the file full: wait...

MYSQL入门InnoDB: Progress in MB: 100

MYSQL入门InnoDB: Error: log file .\ib_logfile1 is of different size 0 52428800 bytes

MYSQL入门InnoDB: than specified in the .cnf file 0 114294784 bytes!

MYSQL入门101001 18:39:30 [ERROR] Default storage engine (InnoDB) is not available

MYSQL入门101001 18:39:30 [ERROR] Aborting

MYSQL入门101001 18:39:30 [Note] D:\MySQL5\bin\mysqld-nt: Shutdown complete

MYSQL入门可以看到,ib_logfile0的问题解决了,但是同样的问题却出在ib_logfile1上面了.于是依样画葫芦,把ib_logfile1删了,再重启MySQL服务,却发现没用.难道是还要重启系统.果真,把前面两个ib_logfile删了,重启系统就搞定了.前面的可能是因为刚开机,所以也行.实际上是需要重启系统的.这时的日志如下

MYSQL入门101001 19:19:24 InnoDB: Log file .\ib_logfile0 did not exist: new to be created

MYSQL入门InnoDB: Setting log file .\ib_logfile0 size to 109 MB

MYSQL入门InnoDB: Database physically writes the file full: wait...

MYSQL入门InnoDB: Progress in MB: 100

MYSQL入门101001 19:19:26 InnoDB: Log file .\ib_logfile1 did not exist: new to be created

MYSQL入门InnoDB: Setting log file .\ib_logfile1 size to 109 MB

MYSQL入门InnoDB: Database physically writes the file full: wait...

MYSQL入门InnoDB: Progress in MB: 100

MYSQL入门InnoDB: Cannot initialize created log files because

MYSQL入门InnoDB: data files are corrupt, or new data files were

MYSQL入门InnoDB: created when the database was started previous

MYSQL入门InnoDB: time but the database was not shut down

MYSQL入门InnoDB: normally after that.

MYSQL入门101001 19:19:27 [ERROR] Default storage engine (InnoDB) is not available

MYSQL入门101001 19:19:27 [ERROR] Aborting

MYSQL入门101001 19:19:27 [Note] D:\MySQL5\bin\mysqld-nt: Shutdown complete

MYSQL入门好了,现在只剩下最后一个问题了Default storage engine (InnoDB) is not available.去services.msc里面启动MySQL服务,还是出错.但是日志却是显示

MYSQL入门InnoDB: No valid checkpoint found.

MYSQL入门InnoDB: If this error appears when you are creating an InnoDB database,

MYSQL入门InnoDB: the problem may be that during an earlier attempt you managed

MYSQL入门InnoDB: to create the InnoDB data files, but log file creation failed.

MYSQL入门InnoDB: If that is the case, please refer to

MYSQL入门InnoDB: http://dev.mysql.com/doc/mysql/en/Error_creating_InnoDB.html

MYSQL入门101001 20:45:09 [ERROR] Default storage engine (InnoDB) is not available

MYSQL入门101001 20:45:09 [ERROR] Aborting

MYSQL入门101001 20:45:09 [Note] D:\MySQL5\bin\mysqld-nt: Shutdown complete

MYSQL入门于是去网上搜索了一下,发现提示No valid checkpoint found.的解决办法：删除所有现有的ibdataN和ib_logfileN文件后,重启Mysql.于是照做,果然行了.

MYSQL入门InnoDB: The first specified data file D:\MySQL InnoDB Datafiles\ibdata1 did not exist:

MYSQL入门InnoDB: a new database to be created!

MYSQL入门101001 21:04:24 InnoDB: Setting file D:\MySQL InnoDB Datafiles\ibdata1 size to 10 MB

MYSQL入门InnoDB: Database physically writes the file full: wait...

MYSQL入门101001 21:04:25 InnoDB: Log file .\ib_logfile0 did not exist: new to be created

MYSQL入门InnoDB: Setting log file .\ib_logfile0 size to 109 MB

MYSQL入门InnoDB: Database physically writes the file full: wait...

MYSQL入门InnoDB: Progress in MB: 100

MYSQL入门101001 21:04:27 InnoDB: Log file .\ib_logfile1 did not exist: new to be created

MYSQL入门InnoDB: Setting log file .\ib_logfile1 size to 109 MB

MYSQL入门InnoDB: Database physically writes the file full: wait...

MYSQL入门InnoDB: Progress in MB: 100

MYSQL入门InnoDB: Doublewrite buffer not found: creating new

MYSQL入门InnoDB: Doublewrite buffer created

MYSQL入门InnoDB: Creating foreign key constraint system tables

MYSQL入门InnoDB: Foreign key constraint system tables created

MYSQL入门101001 21:04:31 InnoDB: Started; log sequence number 0 0

MYSQL入门101001 21:04:32 [Note] D:\MySQL5\bin\mysqld-nt: ready for connections.

MYSQL入门Version: '5.0.18-nt' socket: '' port: 3306 MySQL Community Edition (GPL)

MYSQL入门奋斗了一天,总算成功地把MySQL从MyISAM转换成InnoDB引擎了.也学会了读懂错误日志文件err文件了.不过我就在想了,如果从一开始就按照上面的做,不知道会怎么样呢?
转自 DarkBlue blog

转载请注明本页网址：
http://www.vephp.com/jiaocheng/5285.html