《Mysql实例MySQL实现树状所有子节点查询的方法》要点:
本文介绍了Mysql实例MySQL实现树状所有子节点查询的方法,希望对您有用。如果有疑问,可以联系我们。
MYSQL教程本文实例讲述了MySQL实现树状所有子节点查询的方法.分享给大家供大家参考,具体如下:
MYSQL教程在Oracle 中我们知道有一个 Hierarchical Queries 通过CONNECT BY 我们可以方便的查了所有当前节点下的所有子节点.但很遗憾,在MySQL的目前版本中还没有对应的功能.
MYSQL教程在MySQL中如果是有限的层次,比如我们事先如果可以确定这个树的最大深度是4, 那么所有节点为根的树的深度均不会超过4,则我们可以直接通过left join 来实现.
MYSQL教程但很多时候我们无法控制树的深度.这时就需要在MySQL中用存储过程来实现或在你的程序中来实现这个递归.本文讨论一下几种实现的方法.
MYSQL教程样例数据:
MYSQL教程
mysql> create table treeNodes
-> (
-> id int primary key,
-> nodename varchar(20),
-> pid int
-> );
Query OK, 0 rows affected (0.09 sec)
mysql> select * from treenodes;
+----+----------+------+
| id | nodename | pid |
+----+----------+------+
| 1 | A | 0 |
| 2 | B | 1 |
| 3 | C | 1 |
| 4 | D | 2 |
| 5 | E | 2 |
| 6 | F | 3 |
| 7 | G | 6 |
| 8 | H | 0 |
| 9 | I | 8 |
| 10 | J | 8 |
| 11 | K | 8 |
| 12 | L | 9 |
| 13 | M | 9 |
| 14 | N | 12 |
| 15 | O | 12 |
| 16 | P | 15 |
| 17 | Q | 15 |
+----+----------+------+
17 rows in set (0.00 sec)
MYSQL教程树形图如下
MYSQL教程
1:A
+-- 2:B
| +-- 4:D
| +-- 5:E
+-- 3:C
+-- 6:F
+-- 7:G
8:H
+-- 9:I
| +-- 12:L
| | +--14:N
| | +--15:O
| | +--16:P
| | +--17:Q
| +-- 13:M
+-- 10:J
+-- 11:K
MYSQL教程方法一:利用函数来得到所有子节点号.
MYSQL教程创建一个function getChildLst, 得到一个由所有子节点号组成的字符串.
MYSQL教程
mysql> delimiter //
mysql>
mysql> CREATE FUNCTION `getChildLst`(rootId INT)
-> RETURNS varchar(1000)
-> BEGIN
-> DECLARE sTemp VARCHAR(1000);
-> DECLARE sTempChd VARCHAR(1000);
->
-> SET sTemp = '$';
-> SET sTempChd =cast(rootId as CHAR);
->
-> WHILE sTempChd is not null DO
-> SET sTemp = concat(sTemp,',',sTempChd);
-> SELECT group_concat(id) INTO sTempChd FROM treeNodes where FIND_IN_SET(pid,sTempChd)>0;
-> END WHILE;
-> RETURN sTemp;
-> END
-> //
Query OK, 0 rows affected (0.00 sec)
mysql>
mysql> delimiter ;
MYSQL教程使用我们直接利用find_in_set函数配合这个getChildlst来查找
MYSQL教程
mysql> select getChildLst(1);
+-----------------+
| getChildLst(1) |
+-----------------+
| $,1,2,3,4,5,6,7 |
+-----------------+
1 row in set (0.00 sec)
mysql> select * from treeNodes
-> where FIND_IN_SET(id, getChildLst(1));
+----+----------+------+
| id | nodename | pid |
+----+----------+------+
| 1 | A | 0 |
| 2 | B | 1 |
| 3 | C | 1 |
| 4 | D | 2 |
| 5 | E | 2 |
| 6 | F | 3 |
| 7 | G | 6 |
+----+----------+------+
7 rows in set (0.01 sec)
mysql> select * from treeNodes
-> where FIND_IN_SET(id, getChildLst(3));
+----+----------+------+
| id | nodename | pid |
+----+----------+------+
| 3 | C | 1 |
| 6 | F | 3 |
| 7 | G | 6 |
+----+----------+------+
3 rows in set (0.01 sec)
MYSQL教程优点: 简单,方便,没有递归调用层次深度的限制 (max_sp_recursion_depth,最大255) ;
MYSQL教程缺点:长度受限,虽然可以扩大 RETURNS varchar(1000),但总是有最大限制的.
MYSQL教程MySQL目前版本( 5.1.33-community)中还不支持function 的递归调用.
MYSQL教程方法二:利用临时表和过程递归
MYSQL教程创建存储过程如下.createChildLst 为递归过程,showChildLst为调用入口过程,准备临时表及初始化.
MYSQL教程
mysql> delimiter //
mysql>
mysql> # 入口过程
mysql> CREATE PROCEDURE showChildLst (IN rootId INT)
-> BEGIN
-> CREATE TEMPORARY TABLE IF NOT EXISTS tmpLst
-> (sno int primary key auto_increment,id int,depth int);
-> DELETE FROM tmpLst;
->
-> CALL createChildLst(rootId,0);
->
-> select tmpLst.*,treeNodes.* from tmpLst,treeNodes where tmpLst.id=treeNodes.id order by tmpLst.sno;
-> END;
-> //
Query OK, 0 rows affected (0.00 sec)
mysql>
mysql> # 递归过程
mysql> CREATE PROCEDURE createChildLst (IN rootId INT,IN nDepth INT)
-> BEGIN
-> DECLARE done INT DEFAULT 0;
-> DECLARE b INT;
-> DECLARE cur1 CURSOR FOR SELECT id FROM treeNodes where pid=rootId;
-> DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = 1;
->
-> insert into tmpLst values (null,rootId,nDepth);
->
-> OPEN cur1;
->
-> FETCH cur1 INTO b;
-> WHILE done=0 DO
-> CALL createChildLst(b,nDepth+1);
-> FETCH cur1 INTO b;
-> END WHILE;
->
-> CLOSE cur1;
-> END;
-> //
Query OK, 0 rows affected (0.00 sec)
mysql> delimiter ;
MYSQL教程调用时传入结点
MYSQL教程
mysql> call showChildLst(1);
+-----+------+-------+----+----------+------+
| sno | id | depth | id | nodename | pid |
+-----+------+-------+----+----------+------+
| 4 | 1 | 0 | 1 | A | 0 |
| 5 | 2 | 1 | 2 | B | 1 |
| 6 | 4 | 2 | 4 | D | 2 |
| 7 | 5 | 2 | 5 | E | 2 |
| 8 | 3 | 1 | 3 | C | 1 |
| 9 | 6 | 2 | 6 | F | 3 |
| 10 | 7 | 3 | 7 | G | 6 |
+-----+------+-------+----+----------+------+
7 rows in set (0.13 sec)
Query OK, 0 rows affected, 1 warning (0.14 sec)
mysql>
mysql> call showChildLst(3);
+-----+------+-------+----+----------+------+
| sno | id | depth | id | nodename | pid |
+-----+------+-------+----+----------+------+
| 1 | 3 | 0 | 3 | C | 1 |
| 2 | 6 | 1 | 6 | F | 3 |
| 3 | 7 | 2 | 7 | G | 6 |
+-----+------+-------+----+----------+------+
3 rows in set (0.11 sec)
Query OK, 0 rows affected, 1 warning (0.11 sec)
MYSQL教程depth 为深度,这样可以在程序进行一些显示上的格式化处理.类似于oracle中的 level 伪列.sno 仅供排序控制.这样你还可以通过临时表tmpLst与数据库中其它表进行联接查询.
MYSQL教程MySQL中你可以利用系统参数 max_sp_recursion_depth 来控制递归调用的层数上限.如下例设为12.
MYSQL教程
mysql> set max_sp_recursion_depth=12;
Query OK, 0 rows affected (0.00 sec)
MYSQL教程优点 : 可以更灵活处理,及层数的显示.并且可以按照树的遍历顺序得到结果.
MYSQL教程缺点 : 递归有255的限制.
MYSQL教程方法三:利用中间表和过程
MYSQL教程(本方法由yongyupost2000提供样子改编)
创建存储过程如下.由于MySQL中不允许在同一语句中对临时表多次引用,只以使用普通表tmpLst来实现了.当然你的程序中负责在用完后清除这个表.
MYSQL教程
delimiter //
drop PROCEDURE IF EXISTS showTreeNodes_yongyupost2000//
CREATE PROCEDURE showTreeNodes_yongyupost2000 (IN rootid INT)
BEGIN
DECLARE Level int ;
drop TABLE IF EXISTS tmpLst;
CREATE TABLE tmpLst (
id int,
nLevel int,
sCort varchar(8000)
);
Set Level=0 ;
INSERT into tmpLst SELECT id,Level,ID FROM treeNodes WHERE PID=rootid;
WHILE ROW_COUNT()>0 DO
SET Level=Level+1 ;
INSERT into tmpLst
SELECT A.ID,Level,concat(B.sCort,A.ID) FROM treeNodes A,tmpLst B
WHERE A.PID=B.ID AND B.nLevel=Level-1 ;
END WHILE;
END;
//
delimiter ;
CALL showTreeNodes_yongyupost2000(0);
MYSQL教程执行完后会产生一个tmpLst表,nLevel 为节点深度,sCort 为排序字段.
MYSQL教程使用方法
MYSQL教程
SELECT concat(SPACE(B.nLevel*2),'+--',A.nodename)
FROM treeNodes A,tmpLst B
WHERE A.ID=B.ID
ORDER BY B.sCort;
+--------------------------------------------+
| concat(SPACE(B.nLevel*2),'+--',A.nodename) |
+--------------------------------------------+
| +--A |
| +--B |
| +--D |
| +--E |
| +--C |
| +--F |
| +--G |
| +--H |
| +--J |
| +--K |
| +--I |
| +--L |
| +--N |
| +--O |
| +--P |
| +--Q |
| +--M |
+--------------------------------------------+
17 rows in set (0.00 sec)
MYSQL教程优点 : 层数的显示.并且可以按照树的遍历顺序得到结果.没有递归限制.
MYSQL教程缺点 : MySQL中对临时表的限制,只能使用普通表,需做事后清理.
MYSQL教程以上是几个在MySQL中用存储过程比较简单的实现方法.
MYSQL教程更多关于MySQL相关内容感兴趣的读者可查看本站专题:《MySQL日志操作技巧大全》、《MySQL事务操作技巧汇总》、《MySQL存储过程技巧大全》、《MySQL数据库锁相关技巧汇总》及《MySQL常用函数大汇总》
MYSQL教程希望本文所述对大家MySQL数据库计有所帮助.
转载请注明本页网址:
http://www.vephp.com/jiaocheng/5228.html