《LINUX实战:Linux CentOS 6 NAT 转发 完整教程》要点:
本文介绍了LINUX实战:Linux CentOS 6 NAT 转发 完整教程,希望对您有用。如果有疑问,可以联系我们。
Linux CentOS 6 NAT 转发 完整教程
网络拓补图:
环境介绍:
一台CentOS6 主机,双网卡,两网段
网口设定如下:
[root@CentOS ~]
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
ONBOOT=
yes
BOOTPROTO=dhcp
[root@CentOS ~]
#
[root@CentOS ~]
# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
TYPE=Ethernet
ONBOOT=
yes
BOOTPROTO=static
IPADDR=192.168.66.1
NETMASK=255.255.255.0
[root@CentOS ~]
# service network restart
[root@CentOS ~]
# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0C:29:37:00:93
inet addr:172.16.20.183 Bcast:172.16.255.255 Mask:255.255.0.0
eth1 Link encap:Ethernet HWaddr 00:0C:29:37:00:9D
inet addr:192.168.66.1 Bcast:192.168.66.255 Mask:255.255.255.0
打开网卡转发
[root@CentOS ~]
# vim /etc/sysctl.conf
net.ipv4.ip_forward = 1
立即生效
[root@CentOS ~]
# sysctl -p
转发规则:
[root@CentOS ~]
# iptables -t nat -A POSTROUTING -s 192.168.66.0/24 -j SNAT --to 172.16.20.183 #出口为静态IP选这个
[root@CentOS ~]
# iptables -t nat -A POSTROUTING -s 192.168.66.0/24 -o eth0 -j MASQUERADE #出口为动态IP选这个
查看/保存转发规则
[root@CentOS ~]
# iptables -t nat -nL
[root@CentOS ~]
# service iptables save
========验证NAT=======
在192.168.66/24网段内,一台linux主机设置为:
[root@CentOS ~]
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
ONBOOT=
yes
BOOTPROTO=static
IPADDR=192.168.66.2
NETMASK=255.255.255.0
GATEWAY=192.168.66.1
DNS1=180.76.76.76.76
DNS2=8.8.8.8
[root@CentOS ~]
#
重启网络服务
[root@CentOS ~]
# service network restart
Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
开始测试
ping 自己测试
[root@CentOS ~]# ping 192.168.66.2
PING 192.168.66.2 (192.168.66.2) 56(84) bytes of data.
64 bytes from 192.168.66.2: icmp_seq=1 ttl=64
time
=0.042 ms
ping网关测试
[root@CentOS ~]# ping 192.168.66.1
PING 192.168.66.1 (192.168.66.1) 56(84) bytes of data.
64 bytes from 192.168.66.1: icmp_seq=1 ttl=64
time
=0.261 ms
ping nat出口测试
[root@CentOS ~]# ping 172.16.20.183
PING 172.16.20.183 (172.16.20.183) 56(84) bytes of data.
64 bytes from 172.16.20.183: icmp_seq=1 ttl=64
time
=0.280 ms
ping nat外的工作机
[root@CentOS ~]# ping 172.16.20.245
PING 172.16.20.245 (172.16.20.245) 56(84) bytes of data.
64 bytes from 172.16.20.245: icmp_seq=1 ttl=63
time
=2.39 ms
ping 百度DNS
[root@CentOS ~]# ping 180.76.76.76
PING 180.76.76.76 (180.76.76.76) 56(84) bytes of data.
64 bytes from 180.76.76.76: icmp_seq=1 ttl=52
time
=10.2
ping 网易163
[root@CentOS ~]# ping www.163.com
PING 1stcncloud163.xdwscache.ourwebpic.com (114.80.143.193) 56(84) bytes of data.
64 bytes from 114.80.143.193: icmp_seq=1 ttl=55
time
=9.58 ms
ping 淘宝网
[root@CentOS ~]# ping www.taobao.com
PING www.taobao.com.danuoyi.tbcache.com (114.80.174.46) 56(84) bytes of data.
64 bytes from 114.80.174.46: icmp_seq=1 ttl=48
time
=8.83 ms
完
学习更多LINUX教程,请查看站内专栏,如果有LINUX疑问,可以加QQ交流《LINUX实战:Linux CentOS 6 NAT 转发 完整教程》。